TP-270 is the most popular car parking lift due to its performance and reliability. Easy Installation, sharing post design and multiple safety features are highlights of the two-post car parking lift. The product is capable to park two Large SUV Vehicles. 100% structure parts of TP-270 adopt laser cutting process. The certified standard lifting capacity is 2700kgs. In the practical test, the system can lift 5400kgs.
We developed the prototype of two post car parking lift system in 2005. Because of the positive customer feedback and increasing market demand, our engineers keep developing this type of parking lifts since then. The first generation of two post parking lift adopted checker plate platform design with two locking blocks on the post.
In 2008, we had our second generation of solid parking lift. This time, the platform were formed by 17 pieces of waving plates. In this way, we can lighten the equipment weight and strengthen the structure at the same time. Also the design is much easier for transportation and installation.
In the following three years, we focused on the safety features of the lift. We started to use full range locking slots to substitute the original two-piece locking block. And we replaced the lower limit switch with photocell sensor. We have been also adding and upgrading different safety features from time to time along with the development.
The current TP-270 is the sixth generation of our car parking lift. It’s still a double cylinder design. We also put remote control feature for better user experience. The standard lifting capacity is 2700 kg. After the customization, it can be up to 3200 kg. The lifting height can be up to 2100 mm and even higher on request. The regular parking width for the platform is 2100 mm. There is also the range from 2100 mm – 2500 mm for customer’s choice.
We understand the importance of the safety for the parking system. The lift comes with 20 major safety protections to cover all the aspects. As a heavy duty lift, it fully comply with CE standards. And it’s certified by CCQS which is the most professional and influential CE institution on car lifts. Furthermore, to guarantee the quality, we use railway production standards and facility to manufacture the lift. In this way, we can make sure our solid parking lifts fully satisfy the customer on both appearance and performance.
The operation for this car parking lift is simple and easy. The user rotates the key switch on the control arm beside the platform to start elevating. Or he can lift and lower down the parking plate from the distance by the remote control. If there is any obstacle under the platform, the sensor will be triggered. The lift will not be able to work. Any objects trespass the lift during the operation will also stop the system. For more information about operation, installation and maintenance of TP-270H, please contact us here.
Model | TP-270 |
---|---|
Equipment Weight | 1,100 KG |
Lifting Capacity | 2,700 KG |
Parking Height | 2,100 MM |
Parking Width | 2,100 MM |
Parking Length | 5,000 MM |
Anti-fall Safety Device | Full Range Dynamic Locks |
Additional Safety Device | Limit Switch |
Additional Safety Device | Hydraulic Parachute Valve |
Controller | Key Switch With Emergency Button |
Control Box | Integrated Modules For Simple Wiring |
Power Pack | 2.2 Kw Hydraulic Power Unit |
Electrical Requirement | 220-450 V, 1 /3 Phase, 50/60 Hz |
Control Power | 24 V |
Anti-rust Treatment | Galvanizing And Powder Coating |
Retrieval Time | 45 Seconds |
TP-270 Two Post Car Parking Lift comes with default 1 year warranty for parts, and 5 years on structural parts such as columns, platforms, carriages and so on.
The warranty is effective immediately from the date the lift is dispatched.
In the warranty period, SolidParking shall replace those parts returned to the factory which prove to be defective. This warranty shall not apply unless the product is installed, operated, used and maintained in accordance with the instructions from Solid Parking.